255 Series Face Mills

Geometry Specifications:

Axial: Positive
Radial: Negative

The 255 Series have increased face clearance from standard XR series for increased ramp capability and they have a multi-purpose positive/negative geometry which optimizes horsepower for full utilization. The diameter is measured over the maximum diameter for profile mold programming.

**255 Face Mill - Dimensional Specifications - click for Kits**
Product Number	D	OD	B	H	R	DOC	Insert	Teeth	Wrench
255F0300ARE6-100R	3.00	3.00	1.00	2.00	.375	.375	RECH-63___	4	1557-TX20
255F0300ARE6-125R	3.00	3.00	1.25	2.00	.375	.375	RECH-63___	4	1557-TX20
255F0400ARE6-150R	4.00	4.00	1.50	2.00	.375	.375	RECH-63___	5	1557-TX20

Milling Cutter Nomenclature

**Parts**
Insert IC & Thickness	Insert Number	Insert Number	Screw	Wrench

.750 x .188	RECH-63-10F	RECH-63W520	3605-0001-0023	1557-TX20

Insert Nomenclature

**Starting Machining Parameters**
Material	SFPM	FPT	Primary	Secondary
PH Type Stainless Steel 17-4, 15-5, 13-8	500-1200	.003-.015	RECH-63-10F GR 606jRm	RECH-63W520 GR LTC-14
Austenitic Stainless Steel 302, 304, 316	400-1350	.003-.015	RECH-63-10F GR 586XRm	RECH-63W520 GR LTC-10
Titanium Alloy 3A1-2.5V, 5A16Sn-2Zr-1mo,6A14V	120-325	.003-.015	RECH-63-10F GR 586XRm	RECH-63-10F GR LTC-10
Carbon Steel 1018, 1020, 1215	600-1500	.005-.020	RECH-63W520 GR 606jRm	RECH-63W520 GR LTC-14
Alloyed Steel 4130, 4340, 6150	400-1200	.005-.020	RECH-63W520 GR 606jRm	RECH-63W520 GR LTC-14
Tool Steel	350-1000	.005-.020	RECH-63W520 GR 606jRm	RECH-63W520 GR LTC-14
Nickel Based K-Monel, Inconel 625, A286	100-650	.003-.015	RECH-63-10F GR 586XRm	RECH-63W520 GR LTC-10
Aluminum 2024, 6061, 7072	900-4000	.003-.015	RECH-63-10F GR LTC-10	RECH-63-10F GR LTC-10